Slope Front Storm Shelter
Our shelters are designed and constructed with your protection in mind. They are reinforced with fiber as well as steel rebar, and they are poured with a minimum of 6,000 psi concrete.
The following accessories are included at no extra charge:
- Double handrail on steps
- Gas operated door closer
- 8" wind turbine for ventilation
- 6" vent
Installation
The hole will need to measure 8' wide x 10' long. It is vital to the set that the hole is square to the bottom corners to ensure we have enough room to do the set. The depth of the hole will need to be 53". It is important that the hole not be over-dug and then backfilled, this would cause problems when it settles. There may be an occasional exception when rock is present. If we have to, we can go a bit shallower with the depth. It is also imperative that the hole has a level bottom at that 53" mark. To ensure this level I would suggest using a 2x4 and level or to check it with a transit. If the four corners of the bottom are level and the center of the hole is not high, the set will go quite well. If on the other hand, the level is not attained by the time we show up, the set will take more time. Please use whatever method is best for you to help expedite the process.
Click Here to view Technical Drawing
(PDF 127.6 KB)
Adobe Reader is required to view these files.
If you do not already have it follow the link below.
Limitation of Liability (Design)
Hausner's can not predict actual performance of any structure for tornadoes or severe storms, but this design incorporates current knowledge to best protect the occupants. The engineer and fabricator shall not be obligated or liable for actual, incidental, consequential, or other damages to users of this shelter for any purpose, including those installing or maintaining thereof.
